Parts & Accessories

Trident Reagent Kit 6 Month Supply - With six month kits, the cost of running the Trident is less than $17 per month - that’s averages out to about 7 cents a test! Neptune Systems recommends keeping...

2-month reagent kit (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day).  The reagent kit has at least 240 alkalinity tests and 120 tests each of Calcium and Magnesium. Kits...

Dueto the nature of the chemicals used in the reagents, all orders that include Trident NP reagents must ship ground only.   These NP Reagents CANNOT ship outside the contiguous 48 US States due to...

The Crossover Diet from Neptune Systems is a new type of food that was designed specifically for coral reef tanks and specifically for automatic feeding systems. Working closely with Reed Mariculture...

Another American Marine first. ORP/REDOX calibration fluid. With a precise measurement of 400mV this calibration fluid is included with every PINPOINT® ORP Monitor and PINPOINT® ORP Controller...

DŌS Replacement Pump Head Cap for your Neptune Systems DŌS module.  Complete assembly includes cover, peri-tube, fittings and roller wheel. Neptune Systems recommends that these be replaced...

Neptune Systems Magnetic Probe Rack Features – MPR: Organizes up to four probes. Designed specifically for the Apex Controller probes, a perfect fit for the thicker temp probes. Built with an...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or...

This Energy Bar 832 was redesigned from the ground up.  Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three...

4-pin male to male cable many of you have been waiting for. It is ten feet long. This cable allows you to connect your DŌS to the 1LINK thereby eliminating the need for the DŌS to be connected to a...

PINPOINT® High-Precision pH Calibration Fluids come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). There is...

The DŌS comes standard with 4m of tubing. Many customers have been asking to purchase more tubing. We now have an available accessory — a 16-meter and 4- meter length of the tubing designed...

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The...

This is a power supply for the Neptune Systems FMM, DOS, ATK and Trident.

The DŌS comes standard with 4m of tubing. Many customers have been asking to purchase more tubing. We now have an available accessory — a 16-meter and 4- meter length of the tubing designed...

The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect...

Connect external switches and I/O Inputs to your Apex When connected to the I/O Port of your Apex, Apex Lite, or PMx module, the Breakout Box gives you an easy way to connect up to six external...

A redesigned display module has been created with a slick new look that matches the color scheme. Orange LED

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this...

Plug this probe into your FMM and then place it on any surface where you want to detect stray water. Upon contact with water this probe will communicate to your Apex and alerts or other actions can...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this...

The Kessil Apex Controller Cable connects the Kessil A360 or A160 LED Lights to the Neptune Apex Controller, and to Apex Jr. & Apex Lite Controllers with the VDM Module. 6 feet long.

110V power supply for our DC24 accessories like the PMUP, GRO Refugium LED and Solenoid Valve.  You can use these when there are no available DC24 outputs on your EB832 or 1LINK but do have physical...

Replacement reference standard for Trident calibration. Also included in every 2 month supply reagent kit

This cable connects to the 24VDC accessory connections on the 1LINK. This cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium.  This listing includes a Power Supply. Automatic Top-Off (ATO) Carbon reactors GFO...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex...

The Fluid Monitoring Kit Includes: 1x - FMM Fluid Monitoring Module 1x - 1" Flow Sensor (FS-100) 2x - 1/2" Flow Sensor (FS-50) 2x - 1" Unions 4x - 1/2" Adapters FMK What's In The Box? The...

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people...

Your Tank’s Vitals, visible at a Glance. Upgrade your reef monitoring experience with the AvidAqua InSight—a modern, full-color touchscreen display designed exclusively for Neptune Systems Apex users

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a...

Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this...

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable...